Ruu Htc Desire 500

If you've used HTC Desire 500 for a long time since the last charge, swipe left or right to scale the graph that details battery usage over time. Page 39: Getting The Battery To Last Longer How long the battery can last before it needs recharging depends on how you use HTC Desire 500. HTC Desire 500 power management helps to increase battery. box How to Install HTC Firmware (RUU and ZIP) /box box type=”info” How to Install RUU EXE File /box Step 1: Download the firmware in EXE format for your HTC device on your PC. Step 2: Connect your device to your PC using a USB cable. Make sure before this step tat the device has more than 50% battery.

Here you will find all the latest HTC firmware for HTC Desire 500. If you are looking for HTC Desire 500 stock ROM firmware, then you are on the right page.

Before downloading, make sure your device is HTC Desire 500, if it is not, then flashing the below stock firmware can brick your device.

The HTC Desire 500 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device.

Download HTC Desire 500 Firmware

Htc

File Name: HTC_Desire_500_MT6572_03022016.zip

File Size: 486 MB

Android OS Version: 5.0

Also Download: HTC Desire D626Q Stock Firmware

How To Flash HTC Desire 500 Stock Firmware

  1. Download and extract the HTC Desire 500 firmware package on your computer.
  2. After extracting the package, you will find USB Drivers, flashing tool, and firmware files.
  3. Install the provided drivers on your computer. Skip this step if you already have the drivers installed on your PC.
  4. Launch the firmware flashing tool and load the HTC Desire 500 firmware files inside the flash tool.
  5. Connect your device to the computer using USB cable and begin the firmware flashing process.
  6. Once the flashing is completed, you will see a success message.
  7. Disconnect your HTC Desire 500 device from the computer and restart the device.
Htc

Important Notes:

[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We, nor anybody, should be held responsible for any damage to your device.

[*] Take a Backup: If you are going to flash the above firmware on your HTC Desire 500 device, then make sure to take a backup of your data as it will be deleted after flashing the stock firmware.

[*] Broken link?Report here.

[*] Have we missed any device model? Let us know by contacting us via Contact Us page.

[et_pb_section bb_built=”1″][et_pb_row][et_pb_column type=”4_4″][et_pb_text]

First Download HTC Rom ( HTC Firmware )

[button color=”lightblue”] Recommend Method[/button]

Download Firmware HTC Desire 500 dual sim (z4dug/HTC 5060)

Update Firmware HTC Desire 500 dual sim (z4dug/HTC 5060)

Firmware Firmware HTC Desire 500 dual sim (z4dug/HTC 5060)

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_Turkey_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_signed_Hboot_2_4.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_Turkey_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_signed_2_4.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_Turkey_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_partial_2_4.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_Russian_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_signed_Hboot_2_4.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_Russian_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_signed_2_4.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_Russian_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_partial_2_4.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_ARABIC_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_signed_Hboot_2_4.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_ARABIC_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_signed_2_4.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_ARABIC_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_partial_2_4.zip

STOCK_HTC_Desire_500_deodex_root_gps_rmAPP_fix_1.06.401.1 _v.1.2.7.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTCCN_CHS_1.16.1400.1_Radio_14.11.50QD.14_14.13.50.1NU_release_341610_signed.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_Europe_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_signed.zip

Z4_DUG_0P3ZDIAG.zip

STOCK_HTC_Desire_500_ODEX_1.06.401.1__v.1.0.1.zip

RUU_Z4_DUG_JB412_SENSE50_hTC_Asia_WWE_1.27.707.2_Radio_14.15.50QD.26_14.14.50.1NU_release_389156_sig

Ruu Htc Desire 500 Price

0P3ZIMG_Z4_DUG_JB412_SENSE50_hTC_Asia_WWE_1.12.707.1_Radio_14.07.50QD.18_14.12.50.1JU_release_331829

Firmware Ek villain 720p movie download.

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_Europe_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_signed_Hboot.zip

0P3ZIMG_Z4_DUG_JB412_SENSE50_HTC_Europe_1.26.401.2_Radio_14.15.50QD.26_14.14.50.1NU_release_362696_partial.zip

NANDROID

JamesRom_D500_01032014.zip

RECOVERY

recovery_stock_d500.img

CWM-Recovery_PhilZ_by_SPaWn_500.rar

ROOT

UPDATE-SuperSU-v1.65.zip

Download Firmware




Select the zip file that you want to flash.





Select CSV output folder.




Select Partial zip file

Mavericks download enabler windows 10. This option is only for Android, and please selects the partial zip file.


Select PRL zip file(Optional)

You should make sure the device PRL can be updated.

You should make sure the device PRL can be updated.

Select PRL zip file(Optional)





Click “Start” to trigger the update process






After you click “Start” button, EASY FIRMWARE HTC FLASH Tools will count how many devices are connected to your PC. You could check the number from “Number of Device”.

After ROM update is complete, you could check the result from the EASY FIRMWARE HTC FLASH Tools UI and the csv log will be generated to the folder you set. If all the processes complete successfully, the UI will show “Pass” status, and the phone will reboot to OS mode automatically. If one of the processes is failed, the console will show “Fail” status, and the phone’s progress bar will stay in the position where the error occurs or stay in the bootloader.




[box] How to Install HTC Firmware (RUU and ZIP) [/box]

[box type=”info”] How to Install RUU EXE File [/box]

Step 1: Download the firmware in EXE format for your HTC device on your PC.

Step 2: Connect your device to your PC using a USB cable. Make sure before this step tat the device has more than 50% battery.

Step 3: If the device is not recognized by the PC, ensure you have HTC Drivers installed and then disconnect and reconnect the device from the USB cable.

Step 4: Once the device is properly recognized on the PC, browse to the HTC ROM that you downloaded. Double-click on the file to launch the installation wizard.

Step 5: Follow all of the on-screen instructions shown on your PC.

Step 6: Once the installation is complete, click Finish in the Wizard and the device will reboot.

That’s it. Let your HTC device reboot fully, and then your device will all back to factory state, all issues fixed, in back to stock condition.

Note: If you run into any issue under the above method, like HTC’s update wizard failing to recognize your device, then close the wizard window, and try the same thing after booting your device into fastboot mode (could be download mode for newer HTC devices).

  • From a powered off state, hold Volume Down while powering on the device.
  • Use the volume buttons to scroll to Fastboot option (Download Mode, if you see this option) and then press the Power button to select it.
  • Connect the device to the PC while in Fastboot mode (Download mode, where available) and run the ROM installation wizard again on your PC.

To exit Download mode manually, use the volume keys to navigate to REBOOT and press the Power button to select it.

[box type=”info”] How to Install RUU ZIP File [/box]

Step 1: Download the firmware file in ZIP format for your HTC device and save it on PC. For ease, rename this file to rom.zip (or, if you don’t wish to rename it, be sure to use its full name in the commands below in place of rom.zip that we have used).

Step 2: Download ADB and Fastboot drivers. Extract this zip file into a new folder. Let’s call it adb folder for the purpose of this guide. You must have htc_fastbootfile in this folder.

Step 3: Boot your HTC device into Fastboot mode (or Download mode, for newer HTC devices).

[box type=”download”] HOW TO BOOT INTO HTC DOWNLOAD MODE [/box]Htc desire 610 review

Power off your device and wait for 5-10 seconds until the device is fully switched off.

Htc Desire 500 Price

Press and hold “Power + Volume Down” button until you see a black screen with red text. Stronghold crusader 2 32 bit download. This is your Download mode.
In Download mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option.

Step 4:Connect your device to the PC using a USB cable. Make sure you have installed HTC drivers. In case your PC fails to recognize or detect your HTC device, then you need to install or re-install HTC drivers. Connect using USB cable again thereafter. Doing a PC restart is a good thing too after installing drivers.

Step 5: Once the device is properly recognized on the PC, open a command window inside the folder where your RUU .zip is saved. For this, simply double click on the command prompt file in your adb folder.

Step 6: Now bring the device into RUU mode. Issue the following command in the command window:

Step 7: Now flash the RUU ZIP file with the command given below (you can copy paste):

→ If your RUU ZIP file is not rom.zip, then use the name it got in the command above in place of rom.zip.

Step 8: Let the ROM install now. Most likely, you will get an error at the end of the installation. It’s normal to get such error. It could be: “pre-hboot update: please flush immediately”.

Do this. You have to be in RUU mode (see step 6 above), and then re-flash the ROM ZIP file again (see step 7 above).

Step 9: This time installation will complete and your device will have the firmware installed. Once it’s done your HTC will automatically reboot.

Done.

  1. A PC with Windows or Linux OS.
  2. USB Cord
  3. Manually install VCOM drivers on the PC
  4. Your bricked HTC Android device.
  5. Original/Working HTC Stock ROM
[box type=”bio”] How to Install VCOM Drivers: [/box]

Htc Desire 500 Ruu Exe

  1. Open Device manager from My computer. Click on any item & Goto Actions > Add legacy hadware.
  2. Now, Press next & select Install drivers manually.
  3. Press next & click on Have disk.
  4. From the browse option, select the VCOM drivers as per your OS.
  5. Once its done. You will see a screen similar to this:

Once you are done with the Installation part, goto device manager & you’ll find a device similar to this:

How to Flash ROM using SP Flash Tool:

1. Remove the battery from the phone and slot it back in without booting the phone (If the battery is inbuilt then simply switch if off). Also, ensure there’s no SD card in the phone (if there’s an SD card slot)

2. Launch SP Flash Tool as Administrator

SP Flash Tool
3. Click on Scatter-loading option & browse to the scatter file of your Stock ROM. (You can find the scatter file with the original stock rom zip file)
SP Flash Tool Scatter file selection

This will load few names on your screen with a selected box.

4. Now, if you want to format your phone, Click Format at the top.

5. Once you are done with everything, click on the download button at the top of the window

Start flashing
6. Stop should now be prominent while other options should be grayed out
7. Connect the switched off phone (with battery inside) to the PC via USB cord
8. A progress bar should start running
9. Disconnect the phone, remove the battery for 15 seconds (if removable), slot it back in then power up the phone.
Firmware

Htc Desire 610 Review

[/et_pb_text][/et_pb_column][/et_pb_row][/et_pb_section]